|
|
Component
| Image |
Name |
Size |
Use |
 |
Banding stone wheel (For H.M.P-20) |
400φ |
Turn and help strip ingredients equally |
 |
Banding stone wheel (For H.M.P-30) |
550φ |
Turn and help strip ingredients equally |
|
|
|
Name of each part (part composition)
Operation order
- Plug in with matching voltage (Single phase 220V)
- Press the switch to turn it on
- Supply water through the feed pipe with hose
- Put ingredients slowly for about 70% of the container.
- Check stripping process. Open the outlet when stripping is over to make ingredients
out with centrifugal force. (Open the outlet about 45°)
- Turn if off when ingredients out and operation is over. Wash in and outside of the machine.
|
|
|
Caution
-
It takes time to remove eyes of potato and loss a lot of flesh.
- Check foreign substance before operating.
-
Lift banding stone wheel and wash inside.
- Do not put your hands in the machine while operating.
|
|
|
| Unusual condition |
Check point(Address method) |
| When it is not turn on |
- Plug in another electric output.
- It could have problems in the machine. Please ask A/S. |
Crushed rocks are stuck in potato
|
- It is crushed rock from emery between banding stone
wheel and container. Request A/S. |
| When it is not stripped for long time |
- Abrasion of emery between banding stone wheel and container causes it.
Request A/S. |
| When banding stone wheel runs idle |
- Check the wheel is well inserted in chaft key.
?(Height of the wheel is level with outlet.) |
| When the wheel is not disassembled |
- Upside the machine down and hit on the ground. |
| ※ When problems happen, call us right away and ask A/S (☏ 031-573-0065) |
|
|
|
|
