|
|
Name of each part (part composition)
Operation method
| Order |
Method |
| 1 |
Plug in with matching voltage(single phase 220V). |
| 2 |
Pull the cover holding bundle of [Image 1] and life the cover of [Image 1] to make as like [Image 2] |
| 3 |
Control thickness to turn thickness control volt of [Image 2] with “ㅡ” driver. (It is set to 1mm)
* Turn clockwise to make it thinner. |
| 4 |
If you set thickness, pull the bundle of [Image 1] and hold the cover as [Image 1] shows. |
| 5 |
Put container under the disposing valve, put cabbage into the entrance, turn on the power of [Image 1], and push cabbage with the push bar.
(※ If you push if so hard, turning cutter is stop due to overload. so please push gently.) |
[※ Additional entrance use method]
[※ Use in this case]
- When you want to Slicer “radish” for making vinegar cure or gujeolpan (1mm)
- When you want Slicer “onion”
- When you want Slicer “spring onion”
- When you want Slicer small ingredients
|
Operation method
| Order |
Method |
| 1 |
Put the push bar in to the entrance, turn the handle clockwise, and pull sealing bar. |
| 2 |
Turn the power on of [Image 1], put ingredients into the additional entrance, and push with the sealing bar. |
| 3 |
Control thickness to turn thickness control volt of [Image 2] with “ㅡ” driver. (It is set to 1mm)
* Turn clockwise to make it thinner. |
| 4 |
If you set thickness, pull the bundle of [Image 1] and hold the cover as [Image 1] shows. |
| 5 |
Put container under the disposing valve, put cabbage into the entrance, turn on the power of [Image 1], and push cabbage with the push bar.
(※ If you push if so hard, turning cutter is stop due to overload. so please push gently.) |
|
|
|
|
Caution during operation
- When you push ingredients with the push bar, push gently, not hard.
( Set thickness as 1.5mm and push gently to have 1mm thickness. )
※ If you push if so hard, turning cutter is stop due to overload
- This is for Slicer, and hard ingredients such as sweet potato, carrot, and pumpkin are not available.
- Use the push bar for pushing ingredients. Do not push with your hands.
- Put the sealing bar except for occation when you use the additional entrance.
Clean and storage after use
- Pull plug out before cleaning.
- Separate the cover to wash with water, wipe the machine
with wet cotton, and pour a little water to knife turning disk if you need.
※ It is not completely waterproofed. Do not wash with water.
- The cover and parts(push bar, sealing bar) are made with plastic. Do not store in high-temperature or electric sterilizer or sterilize in boiling water.
Caution for safety
“Caution for safety” is for preventing dander with right operation. So please follow it.
- Do not use others except single phase 220V
- Remove water around plug, and do not put out and in plug with wet hand.
- Use the push bar for putting vegetables. (※Do not push with your hands)
- You could get a cut while washing and knife changing. Please keep it in mind.
- Do not dissemble, repair, and remodel.
|
|
|
| Unusual condition |
Check point(Address method) |
| When it is not turn on |
Plug in another electric output. |
| When ingredients are not cut out |
Check the thickness of knife. |
| When knife is blunt |
+Loosen two +holding volts and change knife
( Purchase our product and change under our description ) |
| It is working when the cover is lifted |
The micro switch has problem. Request A/S |
| It does not work when you follow the manual |
Request A/S |
| ※ When problems happen, call us right away and ask A/S. (☏031-573-0065) | |
|
|
|
HOME >
Product
> Advanced cabbage slicer
> CHASARANG 250
